Repair VSD Orion-01

Orion ESP control stations: Modbus register maps, parameter lists, diagnostics, and SCADA integration notes.
ildus
User avatar
Posts: 38
Joined: Sun May 12, 2019 4:31 am

Repair VSD Orion-01

Post by ildus »

Attachment shared in the original post; see the Russian spoiler for the file.
работает 3771.jpg
Original reply
You do not have the required permissions to view the files attached to this post.
Top
ildus
User avatar
Posts: 38
Joined: Sun May 12, 2019 4:31 am

Repair VSD Orion-01

Post by ildus »

  1. remove thermistors;
  2. connect +15VD;
  3. connect +/-15V;
  4. connect +5VD;
  5. apply voltage +15VD and +5VD simultaneously;
  6. for heating you will have to use a TK24 thermostat at 20 degrees. 
  7. connect heating to any phase
Original reply
  1. удалить термисторы;
  2. подключить +15VD;
  3. подключить +/-15В;
  4. подключить +5VD;
  5. напряжение +15VD и +5VD подавать одновремнно;
  6. на подогрев придется использовать термостат ТК24 на 20 гр. 
  7. подогрев подключить на любую фазу
Top
chitos3572
Posts: 11
Joined: Wed Sep 10, 2014 11:59 pm

Repair VSD Orion-01

Post by chitos3572 »

Still, did the native impulse die or not?
Original reply
Все таки, родной импульсник умер или нет?
Top
ildus
User avatar
Posts: 38
Joined: Sun May 12, 2019 4:31 am

Repair VSD Orion-01

Post by ildus »

Attachment shared in the original post; see the Russian spoiler for the file.
питание от 09.2.jpg
плюс минус 15В.jpg
Original reply
You do not have the required permissions to view the files attached to this post.
Top
ildus
User avatar
Posts: 38
Joined: Sun May 12, 2019 4:31 am

Repair VSD Orion-01

Post by ildus »

using power supply 09.2
20230410_165621.jpg
Original reply
использование блока питания  09.2
You do not have the required permissions to view the files attached to this post.
Top
Serega309
User avatar
Posts: 24
Joined: Wed Nov 09, 2016 7:13 am

Repair VSD Orion-01

Post by Serega309 »

I don’t understand why such perversions... Is it really a problem to restore the original power supply?
Original reply
Не понимаю к чему такие извращения... Неужели проблема восстановить родной блок питания?
Top
ildus
User avatar
Posts: 38
Joined: Sun May 12, 2019 4:31 am

Repair VSD Orion-01

Post by ildus »

You can also install a new native one. But the native scheme works for no more than 1 month. VSD is returned for repairs with a burnt VSD.
Original reply
Можно и новый родной поставить. Но родная схема работает не более 1 месяца. СУ возвращают в ремонт с обгоревший КСУ.
Top
ALEngineer
Site Admin
User avatar
Posts: 249
Joined: Wed Mar 18, 2026 2:51 pm

Repair VSD Orion-01

Post by ALEngineer »

Maybe the reason is not in the block? Are there any traces of hydrogen sulfide? Blackened power terminals? This is also a thing, he likes to “mock” electronics :)
Original reply
Может причина не в блоке? Следов сероводорода нет? Почерневшие силовые клеммы? Тоже штука такая, любит "издеваться" над электроникой :)
Top

Return to “Orion VSDs”