ESP VSD protection types

Technical procedures for ESP surface installation and initial power-up. Discuss electrical testing, VFD configuration, and well ramp-up to stable production
ALEngineer
Site Admin
User avatar
Posts: 703
Joined: Wed Mar 18, 2026 2:51 pm

ESP VSD protection types

Post by ALEngineer »

VSD protections.

Main ESP protections implemented on different VSDs:

- Stuck-pump protection on an ESP VSD;
- Underload / lost-flow protection on an ESP VSD (also called underload);
- voltage-swing protection: undervoltage and overvoltage;
- current phase-unbalance protection;
- voltage phase-unbalance protection;
- low insulation-resistance protection;
- turbine (reverse) rotation protection;
- downhole monitoring system (TMS) protections (temperature, pressure).

How you set ESP protection on modern VSD for ESP systems does not differ in any major way from one drive to another. The setup steps are in the operating manuals for that equipment.
20191212_165123.jpg
Original topic (RU)
Перечислю основные виды защит УЭЦН реализуемые различными станциями управления:

1. Защита от перегрузки (ЗП).
2. Защита от срыва подачи (ЗСП), так же ее называют недогруз.
3. Защита от перепадов напряжения. Защиты от пониженного и повышенного напряжения.
4. Защита от перекоса фаз по току (защита от дисбаланса токов).
5. Защита от перекоса фаз по напряжению (защита от дисбаланса напряжений).
6. Защита от низкого сопротивления изоляции.
7. Защита от турбинного вращения.
8. Защиты по погружной телеметрии (температура, давление).
Методика настройки защиты УЭЦН на различных современных станциях управления (СУ) кардинального отличия друг от друга не имеют, алгоритмы настройки описаны в руководствах по эксплуатации к данному типу оборудования.
20191212_165123.jpg
You do not have the required permissions to view the files attached to this post.