Drum drawing for KPPBP ESP downhole power cable

[ALEngineer]

KPPBP cable-reel drawing for ESP downhole power cable (ESP motor string).

Scan / image text translation (original scan kept as attachment below):

Title on the sheet: Main drum dimensions.

Views: side (profile) of the barrel and flanges; front view of the flange face; View A - options for rib layout for the drive-unit grip (rib / cross, rib thickness 8..12 mm); Detail 1 (M5:1) - rib and "cross" layout at 1200 mm width; Detail 2 (M2:1) - oblong slot on the flange, 60 mm wide x 120 mm high.

Main dimensions called out on the views: axis length 1400-5 mm; distance between flanges 1200-5 mm; outside diameter 2000 +/- 5 mm; barrel diameter 890 +/- 3 mm; center shaft 89 x 6 mm; free axis end 100 +/- 5 mm; flange plate 40-5 mm; six holes 12..25 mm; hub ribs at 120 deg.

Code: Select all

+----+----------------------------------+------------------+------------------------------+
| No | Name                             | Size, mm         | Note                         |
+----+----------------------------------+------------------+------------------------------+
| 1  | Axis length                      | 1400-5           | removable                    |
+----+----------------------------------+------------------+------------------------------+
| 2  | Axis diameter                    | 89               | s-6 wall thickness           |
+----+----------------------------------+------------------+------------------------------+
| 3  | Free axis end                    | 100 +/- 5        |                              |
+----+----------------------------------+------------------+------------------------------+
| 4  | Distance between plates          | 1200-5           |                              |
+----+----------------------------------+------------------+------------------------------+
| 5  | Plate width                      | 40-5             |                              |
+----+----------------------------------+------------------+------------------------------+
| 6  | Corrugation-wave size            | 80               | size type for the grip       |
+----+----------------------------------+------------------+------------------------------+
| 7  | Shell-strip width                | 50+5             |                              |
+----+----------------------------------+------------------+------------------------------+

Notes on the drawing:
1. * Dimensions for reference.
2. Metal drips, burrs, or edge steps are not allowed on the barrel or the inner faces of the flanges.
3. Coating: primer GF-021 GOST 25129-82.
4. Weight of the drum with cable - not more than 5 t.

KPPBP cable [b]drum drawing[/b].jpg

Original topic

Чертеж кабельной катушки для погружного кабеля УЭЦН (ПЭД).

KPPBP cable drum drawing.jpg