Three-position check valves

Technical forum on ESP downhole components. Discuss specifications and installation for Check Valves, Drain Valves, Sand Traps, and well protection hardware
reliy0505@gmail.com
User avatar
Posts: 26
Joined: Sat Aug 17, 2019 1:00 pm

Three-position check valves

Post by reliy0505@gmail.com »

Friends, has anyone actually run three-position check valves? On paper they sound great; in the field there are a lot of negative comments, specifically on valves from NPF Paker. For my job they matter, because most of the producing stock is horizontal laterals after frac, the zones take injection readily, and getting circulation is very hard. Please share operating experience.
Original topic
Друзя, довелось ли кому то использовать в эксплуатации трехпозиционные обратные клапана? на словах - вещь крутая, на деле много отрицательных отзывов, конкретно про клапана производства НПФ Пакер. При моей работе вещь актуальная, т.к. большая часть эксплуатируемого фонда скважин - стволы горизонтальные после ГРП, пласты закачиваемый агент охотно принимают, циркуляции добиться очень сложно. Поделитесь опытом эксплуатации