Original topic
Подскажите, стояла су хлопушка...промысел захотел частотник. Установили СУ Новомет, и начались проблемы.С 48 Гц загрузка 98% хотя раньше на хлопушке с 50 Гц было 65%. Уставки все верные..кто что знает?
Replacing DOL drive with Novomet VFD
-
Arkad
- Posts: 3
- Joined: Wed Aug 29, 2018 9:34 am
Replacing DOL drive with Novomet VFD
Tell me, there was a VFD firecracker...the frequency operator wanted the fishery. We installed VFD Novomet, and problems began. With 48 Hz, the load was 98%, although previously on a clapperboard with 50 Hz it was 65%. The settings are all correct..who knows?
-
ALEngineerSite Admin
- Posts: 249
- Joined: Wed Mar 18, 2026 2:51 pm
Replacing VFD direct start with VFD Novomet
Have you recalculated the tap for the acceleration curve? Calculation of soldering was discussed here: https://esp-forum.com/sizing-vsd-for-esp-motor-power-t82
and here: https://nasosforum.ru/forum/povyshayushc
The post has been moved and a new topic has been created.
and here: https://nasosforum.ru/forum/povyshayushc
The post has been moved and a new topic has been created.
Original reply
А отпайку пересчитали под кривую разгона? Расчет опайки обсуждалось тут: https://esp-forum.com/sizing-vsd-for-esp-motor-power-t82
и тут: https://nasosforum.ru/forum/povyshayushc
Пост перемещен, создана новая тема.
и тут: https://nasosforum.ru/forum/povyshayushc
Пост перемещен, создана новая тема.
-
оын
- Posts: 1
- Joined: Fri Dec 14, 2018 8:52 am
Replacing VFD direct start with VFD Novomet
Perhaps it's a matter of UEF characteristics?
Original reply
возможно дело в уэф характеристиках?