How a PMM ESP motor works

Technical procedures for ESP surface installation and initial power-up. Discuss electrical testing, VFD configuration, and well ramp-up to stable production
ALEngineer
Site Admin
User avatar
Posts: 703
Joined: Wed Mar 18, 2026 2:51 pm

How a PMM ESP motor works

Post by ALEngineer »

PMM operating principle.

Table of contents: Startup and ramp-up of an ESP with a PMM

When voltage is applied to the stator winding, alternating current flows and a rotating magnetic field appears. The rotor permanent-magnet field interacts with the rotating stator field and produces torque.

Unlike an induction motor, the PMM stator is fed non-sinusoidal voltage (pulses). The VSD automatically changes the pulse amplitude with shaft load and, with that, the rotor lag behind the stator field.
20190825_094052_c.jpg
Original topic (RU)
Перейти к оглавлению: Инструкция по запуску и ВНР УЭЦН с вентильным двигателем

При подаче напряжения на обмотку статора, в ней протекает переменный ток и возникает вращающееся магнитное поле. Магнитное поле постоянных магнитов ротора взаимодействует с вращающимся магнитным полем статора, образуя вращающий момент.

В отличие от асинхронного, на статорную обмотку вентильного электродвигателя подаётся несинусоидальное напряжение (импульсы), амплитудное значение которого изменяется автоматически станцией управления в зависимости от нагрузки на валу и, соответственно, угла отставания ротора от магнитного поля статора.
20190825_094052_c.jpg
You do not have the required permissions to view the files attached to this post.