Electrician actions on ESP shutdowns

ESP VFD / VSD control panels and stations: sizing, U/F curves, trips, passwords, Modbus, and brand-specific subforums.
Ратейййй
Posts: 21
Joined: Thu Oct 17, 2013 7:32 am

Electrician actions on ESP shutdowns

Post by Ратейййй »

Does anyone have a document or cheat sheet on what an electrician should do on ESP shutdowns?
Original topic
Доброго времени суток. Есть у кого нибудь какой нибудь документ или шпаргалка. Что должен делать электромонтер при остановках УЭЦН.
ALEngineer
Site Admin
User avatar
Posts: 703
Joined: Wed Mar 18, 2026 2:51 pm

Re: Electrician actions on ESP shutdowns

Post by ALEngineer »

Per section 6 of this instruction, classify the shutdown cause: Instruction for ESP startup and servicing

Then per the customer instruction (for Rosneft, for example, this is ETT (Unified Technical Requirements)), take the corresponding actions: ETT 6.0 Rosneft (Unified Technical Requirements)

For Yandex search (5 pages of instructions from this site :)): Yandex search: electrician memo
Original reply
Исходя из пункта 6 данной инструкции, классифицируем причину остановки: Instruction for ESP startup and servicing Далее по инструкции от заказчика (для Роснефти например это ЕТТ) предпринимаем соответствующие действия: ETT 6.0 Rosneft (Unified Technical Requirements) Для поиска в Яндексе (на 5 страниц инструкций с этого сайта :) ): https://yandex.ru/search/?text=site%3AN ... ера+эцнщик